Tag Archives: new project

New Project: Develop Element Level Bridge Performance Measures and Targets

Currently, federal bridge performance measures in the United States and measures most commonly used by state transportation agencies for bridge management are based on National Bridge Inventory (NBI) General Condition Ratings that reflect bridge component conditions (deck, superstructure and substructure).

MnDOT also collects bridge element data that provides a more granular, objective and quantitative assessment of condition, and would like to have performance measures and targets based on the bridge element data that guides a data-driven methodology to select cost-effective treatments.

Continue reading New Project: Develop Element Level Bridge Performance Measures and Targets

New Project: Development of Erosion Control Product Longevity Test Methodology

MnDOT has approved products for blanket and hydromulches. There are many versions of each type of temporary erosion prevention materials, that vary in thickness, composition, and cost.

The two most common stabilization methods to control erosion and establish vegetation used by MnDOT are Hydraulic Erosion Control Products (HECP) and Rolled Erosion Prevention Products (REPP). Specifying the best fitting product for the situation keeps MnDOT in compliance with stormwater permits and is more cost effective.

Continue reading New Project: Development of Erosion Control Product Longevity Test Methodology

New Project: Complete Streets Speed Impacts

Minnesota Statutes §174.75 requires the MnDOT to follow a complete streets approach in all phases of planning, project development, operation, and maintenance activities. The purpose of the MnDOT complete streets policy “is to address the safety and accessibility needs of users of all ages and abilities. MnDOT assesses user needs at several stages of planning, project scoping and designing, construction, operation, and maintenance.”

Continue reading New Project: Complete Streets Speed Impacts

New Project: Development of Process to Lower Global Warming Potential of Construction Materials

Advances in science of life cycle assessment (LCA) have set the stage to develop methods that meet global warming potential (GWP) reduction targets for construction materials, specifically, using instruments such as Environmental Product Declarations (EPD).

Continue reading New Project: Development of Process to Lower Global Warming Potential of Construction Materials

New Project: Assessing a New Tool for Early Detection of Endangered Turtles on Proposed Transportation Projects

As turtle populations decline worldwide, increased protections (e.g. United States Endangered Species Act) yield increased regulatory burdens. As a consequence, monitoring of imperiled turtle species is imperative to understand both their extant distributions, but also to ensure regulatory compliance.

However, conventional methods for surveying turtles are frequently costly, time consuming, require taxonomic expertise, and unlikely to yield detections without repeated visits. And these burdens are exacerbated when sampling rare, threatened, or endangered (RTE) species. In these instances, innovative technological advances may overcome these limitations, ultimately streamlining monitoring.

Continue reading New Project: Assessing a New Tool for Early Detection of Endangered Turtles on Proposed Transportation Projects

New Project: Assessing Methods to Mitigate Cognitive and Physical Declines That Influence Driving Performance of Older Drivers

Supporting older drivers to safely age in place as they experience age-related declines is important as many Minnesota drivers are reaching retirement age.  Minnesotans, 65 years and older, are expected to represent 20% of the state population by 2025, with an overall increase of 122% from 2010-2040. While older drivers are generally safe drivers, those aged 75-85 face the highest risks from injury.

Continue reading New Project: Assessing Methods to Mitigate Cognitive and Physical Declines That Influence Driving Performance of Older Drivers

New Project: Mitigating Tenting of Transverse Cracks and Joints in Asphalt Pavement

More than 60% of Minnesota’s roadways consists of asphalt pavement. When transverse cracks occur in asphalt, our frigid winters can cause a secondary distress known as pavement tenting, crack heaving, or lipping. As ice accumulates in the base materials underneath, it causes pavement on both sides of the transverse cracks and joints to heave.

Continue reading New Project: Mitigating Tenting of Transverse Cracks and Joints in Asphalt Pavement

New Project: Sustainable Application of Tire Derived Aggregate in Stormwater Infiltration/Treatment

The reuse of old tires that often end up in landfills has a significant environmental benefit. Tire derived aggregate (TDA), a waste product from automobile tires, can be used in stormwater treatment systems and has shown to be effective at retaining phosphate. However, TDA does not prevent the leaching of metals including zinc and copper.  

Developing media for stormwater infiltration/filtration that uses TDA in combination with materials that can capture metals has several advantages. It would prevent more pollutants from being released into Minnesota’s lakes and streams, save on landfill space and reduce stormwater management costs.

“The use of TDA has been proposed in the past for use in stormwater treatment.  However, local agencies aren’t very familiar with the product being used for this application and have concerns about its potential to contaminate groundwater resources,” said Mark Hansen, city engineer, City of Coon Rapids. “Initial research is showing positive benefits for the use of TDA as a component of the stormwater treatment process, while minimizing its impacts to groundwater.  Using TDA for this application provides a great opportunity to redirect old car tires from landfills and beneficially reuse them to assist in providing stormwater treatment.”

Objectives

  • Select blend materials identified in literature review and mix them in different ratios with TDA.
  • Measure the pollutant removal performance from runoff, leaching of zinc and copper from TDA, and infiltration capacity of each mix.
  • Analyze the observed values to choose the suitable blend material/ratio.
  • Perform lab batch tests to evaluate the potential leaching or removal of polyfluoroalkyl substances (PFAs) by TDA and the blends.
  • Determine impact of biofilms on the leaching of zinc and copper from the mix (Biofilms will be grown on an already defined mix of TDA with blend material).
  • Conduct outreach on project results and implications to management to key stakeholder groups.

Project Details

  • Estimated Start Date: 06/03/2022
  • Estimated Completion Date: 06/30/2025
  • Funding: Local Road Research Board
  • Principal Investigator: John Gulliver
  • Co-Principal Investigator: Meijun Cai
  • Technical Liaison:  Mark Hansen

Details of the research study work plan and timeline are subject to change.

To receive email updates about this project, visit the Local Road Research Board website to subscribe.

New Project: Assessment of Pedestrian Safety and Driver Behavior Near Automated Vehicles

With the number of automated vehicles increasing on our roadways it is important to understand their potential impacts and how other road users will interact with them. In the future, there will be a more pronounced shared levels-of-automation transportation network, with fully manual, partially automated, and fully automated vehicles sharing the same Minnesota roads. While planners and engineers have a reasonable idea of how humans drive around other humans, what is not as well-known is human driving behavior around automated vehicles.

Continue reading New Project: Assessment of Pedestrian Safety and Driver Behavior Near Automated Vehicles